Test-Thermocouples

Fits into all thermo-control Thermocouples

With our test thermocouples (also called SAT thermocouples) you can check our protective gas / vacuum thermocouples for any deviations at any time during the process.

Like all thermo-control thermocouples, they are characterized by the following properties:

2.5 mm thin insulating rods made of high-density 99.7% Al₂O₃
with handle and matching compensation cable 2.5 m
As standard, the cable is assembled with bare ends.
Standard delivery lengths from 400 mm to 1600 mm
with calibration certificate, traceable to a national standard or according to AMS 2750
PtRh-Pt versions 4 year warranty against drift and thermowire defects
Recommended interval for re-calibration 10 years
Transport tube 30 mm made of Plexiglas for safe storage of the test thermocouple
Individual process connection according to specification available on request
Optionally with calibration certificate according to AMS 2750
Optionally with DAkkS calibration certificate
Optionally pre-assembled, with cables and plug connections
Individual process connection according to specification on request possible

Available variants

Test thermocouple with compensation cable

Test thermocouple with compensation cable and mini connector

Test thermocouple with compensation cable and standard connector

Test thermocouple with compensation cable and LEMO connector

Standard variant

Test thermocouples follow this specification specification :

LLLL

AAAA

The standard versions can be assembled according to the following key:

Test thermocouples

Calibration according to

01	Calibration certificate based on fixed points Al, Zn, Au, Pd with correction values from 0 °C - 1500 °C in 100K steps ⁽¹⁾
02	Calibration certificate according to AMS 2750 from 0 °C to 1500 °C in 100K steps ⁽¹⁾
03	DakkXs calibration certificate 0 °C to 1500 °C in 100K steps ⁽¹⁾

1 Thermocouple

Type Thermocouple EN 60584-1

01	Type S (PtRh10% - Pt)
02	Type R (PtRh13% - Pt)
03	Type B (PtRh30 - PtRh6)
04	Type K (NiCr - NiAl)
05	Type N (NiCrSil - NiSil)
06	Type J (FeCu - Ni)
07	Type U (Cu - Cu)
08	Type C (WRe26 - WRe5)
09	Type T (Cu - CuNi)
10	Type E (NiCr - CuNi)
11	Type L (Fe - CuNi) DIN 5843

LLLL

Nominal length in mm from 0050 to 1600

AAAA

Assembly

BL 20	2.5 m compensation cable silicone 2 x 0.22 mm², ends bare, 20 mm stripped
MC	2.5 m silicone compensating cable 2 x 0.22 mm², thermal plug Miniature (standard 220°C)
SC	2.5 m silicone compensating cable 2 x 0.22 mm², thermal plug Standard (standard 220°C)
LS3	2.5 m silicone compensating cable 2 x 0.22 mm², S3 LEMO plug

Drawings

Drawing 51kB DXF 2,2 MB 3D STEP 2,2 MB eDarwings 2D 697 KB Zipped CAD files ~1,7 MB

Drawing 65 kB DXF 152 kB 3D STEP 773 kB eDarwings 2D 157 KB Zipped CAD files 752 kB

Drawing 65 kB DXF 152 kB 3D STEP 773 kB eDarwings 2D 157 KB Zipped CAD files 752 kB

You can download the free program eDrawings Viewer to view our drawing files on any device without a CAD environment.

Documents

thermo-control Körtvélyessy - Katalog test thermocouples (de)

Katalog test thermocouples (de) 1.6 MB

thermo-control Körtvélyessy - Instructions for use test thermocouples (de)

Instructions for use test thermocouples (de) 1.2 MB

thermo-control Körtvélyessy - Thermocouples general catalog (de)

Thermocouples general catalog (de) 8.6 MB

thermo-control Körtvélyessy - General information about thermocouples (de)

General information about thermocouples (de) 1.8 MB

Download complete catalog of thermocouples

Download the catalog as a PDF!

Download

General

Your test thermocouple is actually the additional common thermocouple for any number of thermo-control thermocouples. Its protective tube is empty and preheated in each thermocouple in the oven.

Important instructions for use

Caution

Even if you slowly pull the test thermocouple out, it is still very hot, although you cannot see it. There is an acute risk of burns! If the test thermocouple is still connected to the display device, a maximum of 50°C – 60°C should be displayed before the test thermocouple is completely pulled out of the protective tube.

Note

The faster you insert the test thermocouple, the longer you have to wait for stabilization. There is no time to gain by hurrying. If you do it too quickly, the thermocouple will break.